How to Tie a Spider Hitch
intermediate · Make a loop
Making a quick doubled-line loop
A quicker alternative to a Bimini when forming a short double line.
Tie it step by step
The standing line is the long section leading to your rod. The tag end is the short free end you work with.
0 of 5 steps practiced. Check off each step as you learn.
Step 1
Double the desired length and form a small crossing loop near its base.
Step 2
Hold that crossing against a thumb.
Step 3
Wind the doubled section five times around the thumb and held loop for the mono method.
Step 4
Feed the doubled end through the held opening and ease the turns off the thumb in order.
Step 5
Wet and tension all four sections evenly until the coil seats.
Follow the line path
Use this original summary alongside the linked visual reference, especially for the crossings and hand placement. Cover artwork is not a tying diagram.
Open the visual tying reference ↗ (new tab)Reference: NetKnots · Guide checked 2026-11-07
Common Mistakes
- •Letting turns fall off the thumb out of order
- •Using the mono turn count without checking braid guidance
Compare other connections
Dropper Loop →
Creating a hook loop in the middle of your line, the core technique behind a high-low rig
Australian Plait →
Making a long doubled-line section for offshore leaders
Bimini Twist →
Creating a doubled main-line loop for a leader connection
Common Questions
When should I use the Spider Hitch?
A quicker alternative to a Bimini when forming a short double line.
What is the most common mistake tying the Spider Hitch?
Letting turns fall off the thumb out of order
Any tips for a stronger Spider Hitch?
Use the reference for the braid-specific variation, which uses more turns.