How to Tie a Australian Plait
advanced · Make a loop
Making a long doubled-line section for offshore leaders
A specialist alternative to a twisted double line; it requires controlled three-strand braiding.
Tie it step by step
The standing line is the long section leading to your rod. The tag end is the short free end you work with.
0 of 6 steps practiced. Check off each step as you learn.
Step 1
Double enough line for the finished loop and the plait.
Step 2
Take the tag around the standing line and between the loop legs. Hold this junction tightly.
Step 3
Braid the three available strands with alternating crossings under steady tension; follow the linked close-up sequence for hand placement.
Step 4
Continue the plait to the length appropriate for your line class.
Step 5
Fold a finishing loop in the tag and make three further plaits using the doubled tag.
Step 6
Pass the doubled section through the finishing loop, moisten, and draw the braid together evenly before trimming.
Follow the line path
Use this original summary alongside the linked visual reference, especially for the crossings and hand placement. Cover artwork is not a tying diagram.
Open the visual tying reference ↗ (new tab)Reference: NetKnots · Guide checked 2026-11-07
Common Mistakes
- •Letting the braid loosen between crossings
- •Ending the plait without securing its finishing loop
Compare other connections
Dropper Loop →
Creating a hook loop in the middle of your line, the core technique behind a high-low rig
Bimini Twist →
Creating a doubled main-line loop for a leader connection
Homer Rhode Loop Knot →
Giving a lure a fixed loop in heavier leader
Common Questions
When should I use the Australian Plait?
A specialist alternative to a twisted double line; it requires controlled three-strand braiding.
What is the most common mistake tying the Australian Plait?
Letting the braid loosen between crossings
Any tips for a stronger Australian Plait?
Practice the braiding pattern in cord before using fishing line.