Skip to content
RigMyFishFind a Rig

How to Tie a Bimini Twist

advanced · Make a loop

MonofilamentBraid / superline

Creating a doubled main-line loop for a leader connection

Make a loop connection-category illustration, not a knot-tying diagram
Make a loop · Connection type illustration

Used in offshore systems where a doubled section is needed before the next connection.

Before you tie: Braid often needs a different twist count and finishing routine; follow line-specific guidance.
Start tying: 5 steps ↓

Tie it step by step

The standing line is the long section leading to your rod. The tag end is the short free end you work with.

0 of 5 steps practiced. Check off each step as you learn.

  1. Step 1

    Double the line and twist the loop about twenty times for the demonstrated mono method.

  2. Step 2

    Support the open loop and hold even tension on its legs and the standing section.

  3. Step 3

    Ease the tag back over the twisted column while spreading the loop, letting it wind down over the first twists.

  4. Step 4

    Secure the base with a half hitch around one loop leg without releasing tension.

  5. Step 5

    Add three to five securing half hitches around both legs. Seat them together, test, and leave a short tag.

Follow the line path

Use this original summary alongside the linked visual reference, especially for the crossings and hand placement. Cover artwork is not a tying diagram.

Open the visual tying reference ↗ (new tab)

Reference: NetKnots · Guide checked 2026-11-07

Common Mistakes

  • •Dropping tension before securing the base
  • •Treating the mono turn count as universal for all braid
Watch the second layer roll over the first instead of forcing random turns.

Compare other connections

Browse the full knot library →

Explore a complete rig next

See the components and choose a connection that suits your line and tackle.

Common Questions

When should I use the Bimini Twist?

Used in offshore systems where a doubled section is needed before the next connection.

What is the most common mistake tying the Bimini Twist?

Dropping tension before securing the base

Any tips for a stronger Bimini Twist?

Watch the second layer roll over the first instead of forcing random turns.