Skip to content
RigMyFishFind a Rig

How to Tie a Rapala Knot

intermediate · Make a loop

MonofilamentFluorocarbon

Attaching a lure with a fixed loop and an extra locking tuck

Make a loop connection-category illustration, not a knot-tying diagram
Make a loop · Connection type illustration

An alternative open-loop connection for lures that benefit from freedom at the eye.

Before you tie: Keep the loop modest so it does not snag other tackle.
Start tying: 4 steps ↓

Tie it step by step

The standing line is the long section leading to your rod. The tag end is the short free end you work with.

0 of 4 steps practiced. Check off each step as you learn.

  1. Step 1

    Make a loose overhand knot, thread the lure, and return through the overhand opening.

  2. Step 2

    Wind the tag three times around the standing line.

  3. Step 3

    Return through the overhand opening and then through the larger loop created by that return.

  4. Step 4

    Moisten and set the loop size. Draw the standing line and tag steadily to seat the knot.

Follow the line path

Use this original summary alongside the linked visual reference, especially for the crossings and hand placement. Cover artwork is not a tying diagram.

Open the visual tying reference ↗ (new tab)

Reference: NetKnots · Guide checked 2026-11-07

Common Mistakes

  • •Omitting the final large-loop tuck
  • •Accidentally tightening the loop onto the lure eye
Check that the final tuck passes through the newly formed large loop.

Compare other connections

Browse the full knot library →

Common Questions

When should I use the Rapala Knot?

An alternative open-loop connection for lures that benefit from freedom at the eye.

What is the most common mistake tying the Rapala Knot?

Omitting the final large-loop tuck

Any tips for a stronger Rapala Knot?

Check that the final tuck passes through the newly formed large loop.