Skip to content
RigMyFishFind a Rig

How to Tie a Perfection Loop

beginner · Make a loop

MonofilamentFluorocarbon

Making a small fixed loop at the end of a leader

Make a loop connection-category illustration, not a knot-tying diagram
Make a loop · Connection type illustration

Useful when building the loop end of a loop-to-loop leader connection.

Before you tie: A fixed leader loop, not a sliding hook-eye knot.
Start tying: 4 steps ↓

Tie it step by step

The standing line is the long section leading to your rod. The tag end is the short free end you work with.

0 of 4 steps practiced. Check off each step as you learn.

  1. Step 1

    Make a first loop by crossing the tag behind the standing section.

  2. Step 2

    Turn the tag around the standing line to make a second loop in front.

  3. Step 3

    Lay the tag between the two loops and hold it there.

  4. Step 4

    Pull the second loop through the first. Moisten and draw it away from the standing line until locked.

Follow the line path

Use this original summary alongside the linked visual reference, especially for the crossings and hand placement. Cover artwork is not a tying diagram.

Open the visual tying reference ↗ (new tab)

Reference: NetKnots · Guide checked 2026-11-07

Common Mistakes

  • •Pulling the wrong loop through
  • •Letting the tag leave its position between the loops
Use the tip of a smooth tool to hold a very small loop while seating.

Compare other connections

Browse the full knot library →

Common Questions

When should I use the Perfection Loop?

Useful when building the loop end of a loop-to-loop leader connection.

What is the most common mistake tying the Perfection Loop?

Pulling the wrong loop through

Any tips for a stronger Perfection Loop?

Use the tip of a smooth tool to hold a very small loop while seating.