How to Tie a King Sling
intermediate · Make a loop
Leaving an open loop for a lure or streamer
A loop connection formed by twisting a doubled section and passing the tackle through.
Tie it step by step
The standing line is the long section leading to your rod. The tag end is the short free end you work with.
0 of 5 steps practiced. Check off each step as you learn.
Step 1
Thread the lure eye and bring the tag back alongside the standing line.
Step 2
Fold the doubled section over itself to make a second loop.
Step 3
Turn that doubled loop counterclockwise three or four times while holding the lure steady.
Step 4
Pass the whole lure through the twisted doubled opening.
Step 5
Wet and pull the standing section and tag against the lure loop to seat it. Inspect and trim.
Follow the line path
Use this original summary alongside the linked visual reference, especially for the crossings and hand placement. Cover artwork is not a tying diagram.
Open the visual tying reference ↗ (new tab)Reference: NetKnots · Guide checked 2026-11-07
Common Mistakes
- •Trapping a treble hook in the working loop
- •Rotating only one strand of the doubled section
Compare other connections
Dropper Loop →
Creating a hook loop in the middle of your line, the core technique behind a high-low rig
Australian Plait →
Making a long doubled-line section for offshore leaders
Bimini Twist →
Creating a doubled main-line loop for a leader connection
Common Questions
When should I use the King Sling?
A loop connection formed by twisting a doubled section and passing the tackle through.
What is the most common mistake tying the King Sling?
Trapping a treble hook in the working loop
Any tips for a stronger King Sling?
Allow a large enough working loop for the complete lure to pass through.