Skip to content
RigMyFishFind a Rig

How to Tie a Surgeon’s Knot

beginner · Join two lines

MonofilamentFluorocarbon

Joining two leader sections with a double overhand

Join two lines connection-category illustration, not a knot-tying diagram
Join two lines · Connection type illustration

Useful for quick leader repairs when the full leader can pass through a loop.

Also called: Double Surgeon’s Knot, Triple Surgeon’s Knot

Before you tie: A simple join with noticeable bulk; test mismatched line diameters.
Start tying: 4 steps ↓

Tie it step by step

The standing line is the long section leading to your rod. The tag end is the short free end you work with.

0 of 4 steps practiced. Check off each step as you learn.

  1. Step 1

    Overlap the line and leader by several inches.

  2. Step 2

    Treat the pair as one and form an overhand opening.

  3. Step 3

    Take the short tag and the entire leader through that opening twice. Use three passes for the triple variation.

  4. Step 4

    Wet and draw all four sections together evenly. Inspect before trimming the short ends.

Follow the line path

Use this original summary alongside the linked visual reference, especially for the crossings and hand placement. Cover artwork is not a tying diagram.

Open the visual tying reference ↗ (new tab)

Reference: NetKnots · Guide checked 2026-11-07

Common Mistakes

  • •Passing only the leader tag rather than its full length
  • •Pulling just the standing ends while dressing
Keep the leader untangled before feeding it through.

Compare other connections

Browse the full knot library →

Common Questions

When should I use the Surgeon’s Knot?

Useful for quick leader repairs when the full leader can pass through a loop.

What is the most common mistake tying the Surgeon’s Knot?

Passing only the leader tag rather than its full length

Any tips for a stronger Surgeon’s Knot?

Keep the leader untangled before feeding it through.