Skip to content
RigMyFishFind a Rig

How to Tie a Uni Knot

beginner · Hooks & lures

MonofilamentFluorocarbonBraid / superline

Tying one line directly to a hook or swivel

Hooks & lures connection-category illustration, not a knot-tying diagram
Hooks & lures · Connection type illustration

This is the single Uni terminal method; the existing Double Uni guide covers joining two lines.

Also called: Duncan Loop, Grinner Knot, Single Uni

Before you tie: Braid may need more turns; follow your line maker’s guidance.
Start tying: 4 steps ↓

Tie it step by step

The standing line is the long section leading to your rod. The tag end is the short free end you work with.

0 of 4 steps practiced. Check off each step as you learn.

  1. Step 1

    Thread the eye and fold a generous tag alongside the standing section.

  2. Step 2

    Lay the tag across the pair to form a loop.

  3. Step 3

    Wind the tag through the loop around both line sections six times.

  4. Step 4

    Wet and draw the tag to gather the turns, then slide the coil to the eye. Seat and test before trimming.

Follow the line path

Use this original summary alongside the linked visual reference, especially for the crossings and hand placement. Cover artwork is not a tying diagram.

Open the visual tying reference ↗ (new tab)

Reference: NetKnots · Guide checked 2026-11-07

Common Mistakes

  • •Following the line-joining method when tying one hook
  • •Using too few wraps for slippery line
Compare the single Uni with the Double Uni before choosing a connection.

Compare other connections

Browse the full knot library →

Explore a complete rig next

See the components and choose a connection that suits your line and tackle.

Common Questions

When should I use the Uni Knot?

This is the single Uni terminal method; the existing Double Uni guide covers joining two lines.

What is the most common mistake tying the Uni Knot?

Following the line-joining method when tying one hook

Any tips for a stronger Uni Knot?

Compare the single Uni with the Double Uni before choosing a connection.