Skip to content
RigMyFishFind a Rig

How to Tie a NanoFil Knot

intermediate · Hooks & lures

Braid / superline

Tying a doubled-line terminal connection for slippery superline

Hooks & lures connection-category illustration, not a knot-tying diagram
Hooks & lures · Connection type illustration

A double-overhand variation of a Palomar-style connection.

Also called: Double Palomar Variation

Before you tie: NanoFil is a particular line construction; compatibility with other superlines needs checking.
Start tying: 5 steps ↓

Tie it step by step

The standing line is the long section leading to your rod. The tag end is the short free end you work with.

0 of 5 steps practiced. Check off each step as you learn.

  1. Step 1

    Double about six inches of line and feed the folded end through the eye.

  2. Step 2

    Make a loose overhand structure with the hook below it.

  3. Step 3

    Take the folded working end through the overhand opening once more.

  4. Step 4

    Pass the large remaining loop over the complete hook and lift it above the eye.

  5. Step 5

    Moisten and draw both standing section and tag together. Ensure the knot seats at the eye, then check and trim.

Follow the line path

Use this original summary alongside the linked visual reference, especially for the crossings and hand placement. Cover artwork is not a tying diagram.

Open the visual tying reference ↗ (new tab)

Reference: NetKnots · Guide checked 2026-11-07

Common Mistakes

  • •Stopping after a single overhand turn
  • •Leaving the loop caught below the hook eye
Check the manufacturer’s instructions for your exact line.

Compare other connections

Browse the full knot library →

Common Questions

When should I use the NanoFil Knot?

A double-overhand variation of a Palomar-style connection.

What is the most common mistake tying the NanoFil Knot?

Stopping after a single overhand turn

Any tips for a stronger NanoFil Knot?

Check the manufacturer’s instructions for your exact line.