Skip to content
RigMyFishFind a Rig

How to Tie a Fish-N-Fool Knot

intermediate · Hooks & lures

Braid / superlineMonofilamentFluorocarbon

Making a doubled-eye Uni-style terminal connection

Hooks & lures connection-category illustration, not a knot-tying diagram
Hooks & lures · Connection type illustration

A useful terminal alternative when your hook eye accepts two passes of line.

Also called: Fish N Fool Knot

Before you tie: The eye must be large and smooth enough for both passes.
Start tying: 5 steps ↓

Tie it step by step

The standing line is the long section leading to your rod. The tag end is the short free end you work with.

0 of 5 steps practiced. Check off each step as you learn.

  1. Step 1

    Thread the eye twice and leave about six inches of tag.

  2. Step 2

    Lay a loop below the standing section.

  3. Step 3

    Take the tag through that loop five or six times around the parallel line sections.

  4. Step 4

    Moisten and pull the tag until the turns gather neatly.

  5. Step 5

    Slide the formed coil to the eye and load-test before trimming.

Follow the line path

Use this original summary alongside the linked visual reference, especially for the crossings and hand placement. Cover artwork is not a tying diagram.

Open the visual tying reference ↗ (new tab)

Reference: NetKnots · Guide checked 2026-11-07

Common Mistakes

  • •Missing the second eye pass
  • •Letting the coils overlap before sliding them down
Compare its two eye passes with the single-pass Uni method.

Compare other connections

Browse the full knot library →

Common Questions

When should I use the Fish-N-Fool Knot?

A useful terminal alternative when your hook eye accepts two passes of line.

What is the most common mistake tying the Fish-N-Fool Knot?

Missing the second eye pass

Any tips for a stronger Fish-N-Fool Knot?

Compare its two eye passes with the single-pass Uni method.