Skip to content
RigMyFishFind a Rig

How to Tie a Loop-to-Loop Connection

beginner · Join two lines

MonofilamentFluorocarbonFly line / backing

Joining a looped leader to a looped fly line

Join two lines connection-category illustration, not a knot-tying diagram
Join two lines · Connection type illustration

A quick removable join that depends on sound loops at both ends.

Also called: Handshake Connection

Before you tie: The finished connection is only as sound as its two original loops.
Start tying: 4 steps ↓

Tie it step by step

The standing line is the long section leading to your rod. The tag end is the short free end you work with.

0 of 4 steps practiced. Check off each step as you learn.

  1. Step 1

    Pass the loop of the fly line through the leader loop.

  2. Step 2

    Feed the entire leader through the exposed fly-line loop.

  3. Step 3

    Ease the two loops together into an aligned handshake.

  4. Step 4

    Pull the standing sections apart and check that neither loop has folded into a tight girth hitch.

Follow the line path

Use this original summary alongside the linked visual reference, especially for the crossings and hand placement. Cover artwork is not a tying diagram.

Open the visual tying reference ↗ (new tab)

Reference: NetKnots · Guide checked 2026-11-07

Common Mistakes

  • •Forming a girth hitch instead of an aligned handshake
  • •Trusting a damaged welded loop
Inspect welded fly-line loops for cracks before joining.

Compare other connections

Browse the full knot library →

Common Questions

When should I use the Loop-to-Loop Connection?

A quick removable join that depends on sound loops at both ends.

What is the most common mistake tying the Loop-to-Loop Connection?

Forming a girth hitch instead of an aligned handshake

Any tips for a stronger Loop-to-Loop Connection?

Inspect welded fly-line loops for cracks before joining.