Skip to content
RigMyFishFind a Rig

How to Tie a J Knot

intermediate · Join two lines

MonofilamentFluorocarbon

Joining a fly leader and tippet with alternating passes

Join two lines connection-category illustration, not a knot-tying diagram
Join two lines · Connection type illustration

An alternative to a Surgeon’s join when you can pass the entire leader through the opening.

Before you tie: Passing a long or already rigged leader through the opening can be awkward.
Start tying: 5 steps ↓

Tie it step by step

The standing line is the long section leading to your rod. The tag end is the short free end you work with.

0 of 5 steps practiced. Check off each step as you learn.

  1. Step 1

    Overlap the main line and leader with several inches of working space.

  2. Step 2

    Make a loose overhand loop in the pair, taking the complete leader through.

  3. Step 3

    Bring the working pair through again from the back at the top.

  4. Step 4

    Repeat the alternating upper and lower passes shown in the reference; the finished pattern has two top and two bottom passes.

  5. Step 5

    Wet the join and tension all sections evenly until seated. Check and trim.

Follow the line path

Use this original summary alongside the linked visual reference, especially for the crossings and hand placement. Cover artwork is not a tying diagram.

Open the visual tying reference ↗ (new tab)

Reference: NetKnots · Guide checked 2026-11-07

Common Mistakes

  • •Repeating a Surgeon’s pass instead of alternating the J pattern
  • •Catching a leader coil in the loop
Keep the full leader free of tangles before starting.

Compare other connections

Browse the full knot library →

Common Questions

When should I use the J Knot?

An alternative to a Surgeon’s join when you can pass the entire leader through the opening.

What is the most common mistake tying the J Knot?

Repeating a Surgeon’s pass instead of alternating the J pattern

Any tips for a stronger J Knot?

Keep the full leader free of tangles before starting.