Skip to content
RigMyFishFind a Rig

How to Tie a FG Knot

advanced · Join two lines

Braid / superlineMonofilamentFluorocarbon

Building a slim braid-to-leader connection for casting

Join two lines connection-category illustration, not a knot-tying diagram
Join two lines · Connection type illustration

Useful when a long leader must pass through rod guides and you can maintain tension while weaving.

Before you tie: Requires practice and a firm grip test with your actual braid and leader.
Start tying: 6 steps ↓

Tie it step by step

The standing line is the long section leading to your rod. The tag end is the short free end you work with.

0 of 6 steps practiced. Check off each step as you learn.

  1. Step 1

    Keep the braid stretched under tension and lay the leader across it.

  2. Step 2

    Weave alternating braid crossings around opposite sides of the leader; keep each crossing tight.

  3. Step 3

    Build a neat woven section roughly half to three-quarters of an inch long, adjusting to the line combination.

  4. Step 4

    Pinch the junction and secure it with a half hitch around braid and leader, followed by six to eight more.

  5. Step 5

    Pull firmly on the standing braid and leader so the weave grips before cutting the leader tag.

  6. Step 6

    Finish with three or four half hitches around the braid alone. Trim the braid tag and check for slipping.

Follow the line path

Use this original summary alongside the linked visual reference, especially for the crossings and hand placement. Cover artwork is not a tying diagram.

Open the visual tying reference ↗ (new tab)

Reference: NetKnots · Guide checked 2026-11-07

Common Mistakes

  • •Releasing tension before securing the weave
  • •Cutting the leader tag before the braid has bitten
The linked visual demonstrates one tensioned hand method; several FG tying methods exist.

Compare other connections

Browse the full knot library →

Explore a complete rig next

See the components and choose a connection that suits your line and tackle.

Common Questions

When should I use the FG Knot?

Useful when a long leader must pass through rod guides and you can maintain tension while weaving.

What is the most common mistake tying the FG Knot?

Releasing tension before securing the weave

Any tips for a stronger FG Knot?

The linked visual demonstrates one tensioned hand method; several FG tying methods exist.