Skip to content
RigMyFishFind a Rig

How to Tie a Blood Knot

intermediate · Join two lines

MonofilamentFluorocarbon

Joining similar-diameter leader or tippet sections

Join two lines connection-category illustration, not a knot-tying diagram
Join two lines · Connection type illustration

A useful way to build or repair a tapered leader with a compact central join.

Also called: Barrel Knot

Before you tie: Better suited to similar-diameter lines than major diameter changes.
Start tying: 4 steps ↓

Tie it step by step

The standing line is the long section leading to your rod. The tag end is the short free end you work with.

0 of 4 steps practiced. Check off each step as you learn.

  1. Step 1

    Overlap the two ends, leaving enough tag on both sides to work.

  2. Step 2

    Wind one tag around the other line five times, then return it through the middle opening.

  3. Step 3

    Wind the other tag in the opposite direction and return it through the same opening from the opposite side.

  4. Step 4

    Moisten and draw the standing sections apart slowly until both coils gather neatly. Test, then trim.

Follow the line path

Use this original summary alongside the linked visual reference, especially for the crossings and hand placement. Cover artwork is not a tying diagram.

Open the visual tying reference ↗ (new tab)

Reference: NetKnots · Guide checked 2026-11-07

Common Mistakes

  • •Putting both tags through the opening in the same direction
  • •Using this join for wildly mismatched diameters
Pinch the middle opening until both tags have passed through.

Compare other connections

Browse the full knot library →

Common Questions

When should I use the Blood Knot?

A useful way to build or repair a tapered leader with a compact central join.

What is the most common mistake tying the Blood Knot?

Putting both tags through the opening in the same direction

Any tips for a stronger Blood Knot?

Pinch the middle opening until both tags have passed through.