Skip to content
RigMyFishFind a Rig

How to Tie a Berkley Braid Knot

intermediate · Hooks & lures

Braid / superline

Attaching braided line with a doubled wrap connection

Hooks & lures connection-category illustration, not a knot-tying diagram
Hooks & lures · Connection type illustration

Designed for slippery braided or fused superlines; compare with the line maker’s own recommendation.

Before you tie: A doubled pattern needs sufficient room in the tackle eye.
Start tying: 5 steps ↓

Tie it step by step

The standing line is the long section leading to your rod. The tag end is the short free end you work with.

0 of 5 steps practiced. Check off each step as you learn.

  1. Step 1

    Double the line and pass the folded end through the tackle eye.

  2. Step 2

    Fold it back parallel to the standing section and tag, holding four strands together.

  3. Step 3

    Wind the working loop eight times around the four strands toward the eye.

  4. Step 4

    Pass the loop through the opening just above the eye.

  5. Step 5

    Moisten and seat with smooth, even tension. Check the connection before clipping the waste loop and tag.

Follow the line path

Use this original summary alongside the linked visual reference, especially for the crossings and hand placement. Cover artwork is not a tying diagram.

Open the visual tying reference ↗ (new tab)

Reference: NetKnots · Guide checked 2026-11-07

Common Mistakes

  • •Wrapping only part of the four-strand bundle
  • •Cutting the loop before the connection is seated
Keep all four sections aligned while forming the wraps.

Compare other connections

Browse the full knot library →

Common Questions

When should I use the Berkley Braid Knot?

Designed for slippery braided or fused superlines; compare with the line maker’s own recommendation.

What is the most common mistake tying the Berkley Braid Knot?

Wrapping only part of the four-strand bundle

Any tips for a stronger Berkley Braid Knot?

Keep all four sections aligned while forming the wraps.