Skip to content
RigMyFishFind a Rig

How to Tie a Trilene Knot

beginner · Hooks & lures

MonofilamentFluorocarbon

Attaching mono or fluorocarbon with two passes through an eye

Hooks & lures connection-category illustration, not a knot-tying diagram
Hooks & lures · Connection type illustration

An alternative to a clinch when the tackle eye has room for a doubled pass.

Also called: Two-Turn Clinch

Before you tie: Not intended here as a bare-braid recommendation.
Start tying: 4 steps ↓

Tie it step by step

The standing line is the long section leading to your rod. The tag end is the short free end you work with.

0 of 4 steps practiced. Check off each step as you learn.

  1. Step 1

    Feed the tag through the eye twice and hold the resulting two small loops open.

  2. Step 2

    Wind the tag five or six times around the standing section.

  3. Step 3

    Return the tag through both of the small loops at the eye.

  4. Step 4

    Wet and seat the coil with gradual pressure. Confirm both eye passes lie cleanly before trimming.

Follow the line path

Use this original summary alongside the linked visual reference, especially for the crossings and hand placement. Cover artwork is not a tying diagram.

Open the visual tying reference ↗ (new tab)

Reference: NetKnots · Guide checked 2026-11-07

Common Mistakes

  • •Threading only one eye loop at the finish
  • •Crossing the two strands tightly at the eye
Pinch the two eye loops together so neither is missed.

Compare other connections

Browse the full knot library →

Common Questions

When should I use the Trilene Knot?

An alternative to a clinch when the tackle eye has room for a doubled pass.

What is the most common mistake tying the Trilene Knot?

Threading only one eye loop at the finish

Any tips for a stronger Trilene Knot?

Pinch the two eye loops together so neither is missed.