Skip to content
RigMyFishFind a Rig

How to Tie a Uni Snell Knot

intermediate · Hooks & lures

MonofilamentFluorocarbon

Snelling a bait hook with a Uni-style loop

Hooks & lures connection-category illustration, not a knot-tying diagram
Hooks & lures · Connection type illustration

A distinct snell method that wraps the hook shank through a waiting loop.

Also called: Snell Uni Version

Before you tie: Check the finished leader exits in the direction appropriate for the hook eye.
Start tying: 4 steps ↓

Tie it step by step

The standing line is the long section leading to your rod. The tag end is the short free end you work with.

0 of 4 steps practiced. Check off each step as you learn.

  1. Step 1

    Pass the line through the eye and down beside the shank.

  2. Step 2

    Make a loop below the hook with the working line.

  3. Step 3

    Take the tag around the shank and through that loop four to six times.

  4. Step 4

    Hold the coils together while guiding them toward the eye. Wet and tension both ends to seat them.

Follow the line path

Use this original summary alongside the linked visual reference, especially for the crossings and hand placement. Cover artwork is not a tying diagram.

Open the visual tying reference ↗ (new tab)

Reference: NetKnots · Guide checked 2026-11-07

Common Mistakes

  • •Dropping a coil while returning through the loop
  • •Using a different snell method’s finishing step
Keep the loop accessible throughout the shank wraps.

Compare other connections

Browse the full knot library →

Common Questions

When should I use the Uni Snell Knot?

A distinct snell method that wraps the hook shank through a waiting loop.

What is the most common mistake tying the Uni Snell Knot?

Dropping a coil while returning through the loop

Any tips for a stronger Uni Snell Knot?

Keep the loop accessible throughout the shank wraps.