How to Tie a San Diego Jam Knot
intermediate · Hooks & lures
Securing a lure or hook with a wrapped jam connection
Useful to practice for both shore and offshore tackle, with turn count suited to the line.
Also called: San Diego Knot, Reverse Clinch
Tie it step by step
The standing line is the long section leading to your rod. The tag end is the short free end you work with.
0 of 5 steps practiced. Check off each step as you learn.
Step 1
Thread the eye and retain a generous tag.
Step 2
Hold a small upper loop, then wind the tag seven times around the paired sections toward the eye.
Step 3
Put the tag through the lower opening just above the eye.
Step 4
Bring it back to the held upper loop and feed it through.
Step 5
Wet, snug the coil, and slide it to the eye. Apply steady final tension and inspect.
Follow the line path
Use this original summary alongside the linked visual reference, especially for the crossings and hand placement. Cover artwork is not a tying diagram.
Open the visual tying reference ↗ (new tab)Reference: NetKnots · Guide checked 2026-11-07
Common Mistakes
- •Returning through only the lower opening
- •Crossing the last wraps as the coil slides
Compare other connections
Palomar Knot →
Tying a hook or swivel directly to your main line or leader
Improved Clinch Knot →
Tying a hook, lure, or swivel to your line when the eye is too small for a doubled loop
Snell Knot →
Attaching a hook so the pull comes straight off the shank, common with bait hooks
Common Questions
When should I use the San Diego Jam Knot?
Useful to practice for both shore and offshore tackle, with turn count suited to the line.
What is the most common mistake tying the San Diego Jam Knot?
Returning through only the lower opening
Any tips for a stronger San Diego Jam Knot?
Control the lure with pliers rather than leaving sharp hooks free to swing.