Skip to content
RigMyFishFind a Rig

How to Tie a Pitzen Knot

intermediate · Hooks & lures

MonofilamentFluorocarbon

Attaching a fly with a compact four-wrap connection

Hooks & lures connection-category illustration, not a knot-tying diagram
Hooks & lures · Connection type illustration

Also known as the Eugene Bend or 16-20 knot; these names describe the same basic pattern.

Also called: Eugene Bend, 16-20 Knot

Before you tie: Correct seating is more important than adding extra turns.
Start tying: 4 steps ↓

Tie it step by step

The standing line is the long section leading to your rod. The tag end is the short free end you work with.

0 of 4 steps practiced. Check off each step as you learn.

  1. Step 1

    Thread the eye and fold the tag beneath the standing section.

  2. Step 2

    Keep a small upper loop on a fingertip while taking four turns around the parallel sections toward the fly.

  3. Step 3

    Return the tag through the held upper loop.

  4. Step 4

    Snug the coil, lubricate, and guide it down to the eye with your fingers. Apply final standing-line tension only after positioning it.

Follow the line path

Use this original summary alongside the linked visual reference, especially for the crossings and hand placement. Cover artwork is not a tying diagram.

Open the visual tying reference ↗ (new tab)

Reference: NetKnots · Guide checked 2026-11-07

Common Mistakes

  • •Dragging a tightly jammed dry coil down the line
  • •Missing the original upper loop
Move the dressed coil to the eye before the final hard pull.

Compare other connections

Browse the full knot library →

Common Questions

When should I use the Pitzen Knot?

Also known as the Eugene Bend or 16-20 knot; these names describe the same basic pattern.

What is the most common mistake tying the Pitzen Knot?

Dragging a tightly jammed dry coil down the line

Any tips for a stronger Pitzen Knot?

Move the dressed coil to the eye before the final hard pull.