Skip to content
RigMyFishFind a Rig

How to Tie a Orvis Knot

intermediate · Hooks & lures

MonofilamentFluorocarbon

Connecting a fly or light lure with a compact knot

Hooks & lures connection-category illustration, not a knot-tying diagram
Hooks & lures · Connection type illustration

An option for fine tippet when you can see the small figure-eight opening.

Before you tie: Very fine tippet needs close inspection after tightening.
Start tying: 4 steps ↓

Tie it step by step

The standing line is the long section leading to your rod. The tag end is the short free end you work with.

0 of 4 steps practiced. Check off each step as you learn.

  1. Step 1

    Thread the eye from below and take the tag behind the standing tippet.

  2. Step 2

    Cross in front and feed through the first opening to form a loose figure eight.

  3. Step 3

    Take the tag through the upper opening from behind twice.

  4. Step 4

    Moisten and draw the tag to form the knot, then alternate tension on the tag and standing tippet to seat it at the eye.

Follow the line path

Use this original summary alongside the linked visual reference, especially for the crossings and hand placement. Cover artwork is not a tying diagram.

Open the visual tying reference ↗ (new tab)

Reference: NetKnots · Guide checked 2026-11-07

Common Mistakes

  • •Using the lower opening for the finishing tucks
  • •Pulling tight before dressing the figure eight
Keep the upper opening identifiable for both finishing passes.

Compare other connections

Browse the full knot library →

Common Questions

When should I use the Orvis Knot?

An option for fine tippet when you can see the small figure-eight opening.

What is the most common mistake tying the Orvis Knot?

Using the lower opening for the finishing tucks

Any tips for a stronger Orvis Knot?

Keep the upper opening identifiable for both finishing passes.