Skip to content
RigMyFishFind a Rig

How to Tie a Eye Crosser Knot

intermediate · Hooks & lures

MonofilamentFluorocarbon

Connecting line to an eye with a short two-loop pattern

Hooks & lures connection-category illustration, not a knot-tying diagram
Hooks & lures · Connection type illustration

Useful to learn as an alternative terminal connection with two passes through the eye.

Before you tie: This compact pattern needs careful line routing rather than extra random wraps.
Start tying: 4 steps ↓

Tie it step by step

The standing line is the long section leading to your rod. The tag end is the short free end you work with.

0 of 4 steps practiced. Check off each step as you learn.

  1. Step 1

    Pass the tag through the eye twice, leaving a workable loop.

  2. Step 2

    Fold the tag back alongside the standing section.

  3. Step 3

    Take two turns around the parallel sections to form the locking structure shown in the linked reference.

  4. Step 4

    Moisten and draw the turns into place gradually. Load-test the connection before trimming.

Follow the line path

Use this original summary alongside the linked visual reference, especially for the crossings and hand placement. Cover artwork is not a tying diagram.

Open the visual tying reference ↗ (new tab)

Reference: NetKnots · Guide checked 2026-11-07

Common Mistakes

  • •Losing the doubled eye pass
  • •Closing the wraps before checking their crossing
Use the linked visual to check the crossing before pulling tight.

Compare other connections

Browse the full knot library →

Common Questions

When should I use the Eye Crosser Knot?

Useful to learn as an alternative terminal connection with two passes through the eye.

What is the most common mistake tying the Eye Crosser Knot?

Losing the doubled eye pass

Any tips for a stronger Eye Crosser Knot?

Use the linked visual to check the crossing before pulling tight.