Skip to content
RigMyFishFind a Rig

How to Tie a Easy Snell Knot

intermediate · Hooks & lures

MonofilamentFluorocarbon

Snelling a bait hook by wrapping the free tag

Hooks & lures connection-category illustration, not a knot-tying diagram
Hooks & lures · Connection type illustration

A separate snell method from the loop-wrapping version in the original Snell guide.

Before you tie: Choose a hook and leader combination that allows orderly shank wraps.
Start tying: 4 steps ↓

Tie it step by step

The standing line is the long section leading to your rod. The tag end is the short free end you work with.

0 of 4 steps practiced. Check off each step as you learn.

  1. Step 1

    Feed the leader through the eye toward the hook point. Form a loop beside the shank and take the tag behind it.

  2. Step 2

    Wind the tag around the shank and line five to seven times, progressing toward the eye.

  3. Step 3

    Send the tag through the waiting loop from below.

  4. Step 4

    Hold the coils, moisten, and draw the tag to close the loop. Seat both ends and trim after checking.

Follow the line path

Use this original summary alongside the linked visual reference, especially for the crossings and hand placement. Cover artwork is not a tying diagram.

Open the visual tying reference ↗ (new tab)

Reference: NetKnots · Guide checked 2026-11-07

Common Mistakes

  • •Mixing these tag-wrap steps with another snell method
  • •Releasing the coils while tightening
Hold each turn against the shank until the loop closes.

Compare other connections

Browse the full knot library →

Common Questions

When should I use the Easy Snell Knot?

A separate snell method from the loop-wrapping version in the original Snell guide.

What is the most common mistake tying the Easy Snell Knot?

Mixing these tag-wrap steps with another snell method

Any tips for a stronger Easy Snell Knot?

Hold each turn against the shank until the loop closes.